Garage equipment, Automotive repair and maintenance

ST-3D602 Four Wheel Aligner, 3D Wheel Alignment System

wheel alignment 3D, wheel aligner

ST-3D602 vehicle four wheel aligner

Higher accuracy and more powerful.
Accuracy can reach to 0.1mm/0.01°.
It can be realized all traditional parameters, in addition to measure the wheel base difference and wheel tread difference ect parameters, easy to complete more function that common aligner can not reach.

Easy Operation
The measurement is not influence by the platform degree level, and the accuracy is also not affected by the body tilt.
Just push the car or scroll the wheel, you can complete all the measurement.
Install the target, vehicle roll compensation, virtual measurement, measurement speed is very fast.
No moving parts, no maintenance, target without calibration, no electronic components on the wheel, if the target falls, there will be no damage to the circuit, continue to work after installed.

Target of wheel aligner
* Corrosion resistance * Shatterproof aluminum surface
* Impact-resistant cover * Bulit-in buffer
* No electronic components on the wheel * No maintenance
* Light weight design * No cable and no calibration

Principle of measurement
Install the four target on the four wheels, and roll of wheels, the camera will continuously shoot the geometric figures on the target reflectors. After the computer analysis on the changes of the geometric figures, the correspondent alignment parameters will be worked out, and then shown by the display screen. This technology is based on the basic principle of physical science perspective and computer information processing technology.

Lower failure rate
No electronic components on the reflective target, no batteries, no data transmission, since only the role of reflective images.
Metal bracket for the main frame, beams are mostly casting, compression and strong corrosion.
Computer with high-end configuration to accommodate large data processing, more stable performance.
Two high-resolution digital cameras continuously monitor the target on each wheel, the camera mounted on a high place to avoid damage.

Choose the reference level
Real-time reference level: use target as reference level
Fixed reference level: car lift level as reference level

Optional installation method for ST-3D602 wheel aligner

vehicle four wheel alignment

automatic up and down

four wheel aligners

built in wall

four wheel alignment

Economical single-arm

 

 

 

 

 

 

 

four wheel alignment system

trench-style

wheel aligner

hanging style

wheel aligner

Cabinet Column

 

 

 

 

 

 

 

Features:

1. It has the latest 3D alignment software which is easy to operate, 32″/217″ LCD dual-screen display.

2. Mini-printer is optional, which will save 4/5 consumables (international-leading).

3. Windows XP operating system and international standard interface, easy to understand and learn.

4. Software and hardware of the alignment machines reserve 15 years’ upgrade room.

5. The repeated measurement error is within the international standard ±0.04°, which rightly meet the need of luxury cars, more accuracy.

6. The handheld auxiliary monitor is optional.

7. Zero calibration software is optional, the sensors can be self-calibrated after the warranty period.

8. It is man-machine interactive interface, and operating procedures can be traced by animation demos, the dynamic instructions make you feel on the scene.

9. Adjustment in-phase between console and sensor intervals 0.5 second only, achieving high efficiency and speed.

10. Super-low chassis vehicles can be detected.

11. It has professional adjustment program ( Volkswagen VAG special procedures ) for AUDI A6 & PASSAT B5 together with video demos.

12. Voice function and alert tones for leveling are newly added. More convenient and quicker.

Technical Data:

Item

Precision

Measurement
Range

Total Measurement
Range

Camber

±0.02°

±8°

±8°

Caster

±0.05°

±19°

±19°

Front wheel KPI

±0.02°

±19°

±19°

Toe

±0.02°

±2°

±8°

Rear wheel
thrust angle

±0.02°

±2°

±4°

Axis Deflection
of rear wheel

±0.02°

±2°

±4°

Wheel spacing
difference

±0.03°

±2°

±8°

Front setback

±0.02°

±2°

±4°

Rear setback

±0.02°

±2°

±4°

Wheel spacing

±0.64cm(±0.25cm )

<265cm (<105in)

<265cm (<105in)

Axis spacing

±0.64cm(±0.25cm )

<533cm (<210in)

<533cm (<210in)




                
Tags: ,,,

2 comments

  1. Llaai
    2014/01/13 at 14:11:25

    Please send me the price of ST-3D602 Four Wheel Aligner, 3D Wheel Alignment System,ST-120 Garage workshop Wheel Balancer, ST-TC26 Tilting column 26“ automotive tyre changer, garage shop equipment.

    I am in South africa and also are there any trade show you are attending in South Africa?

  2. vaibhav
    2013/11/27 at 08:56:00

    Hello sir,
    Please give me a quotation & detail of 4 wheel garage equipment like
    1. Alignment machine
    2. Balancing machine
    3. Rim straightener
    4. Tyre changing machine
    5. Nitrogen generator/air infiltrators machine
    6. Air compressor
    7. Pneumatic tools
    8. Hydraulic jack
    9. Oil bleeder
    10. Head beam alignment
    11. Dent Puller
    Etc.

    My detail address is

    Vaibhav Gawatre
    “VAIBHAVSHALI” building
    Gokul colony
    Akola 444005/444001
    Maharashtra (Vidarbha)
    Mobile:- 9730066998
    E-mail:- Vaibhav.gawatre@gmail.com

    Thank you

Comments

Name *

Mail (will not be published) *

0+8=? Verification code *