Garage equipment, Automotive repair and maintenance

ST-36N Tyre Nitrogen Filling Station

tire nitrogen generator

ST-36N Tire nitrogen generator and inflator

* Pump the air from the tyre by the internal vacuum generator before nitrogen inflation

* Auto-Start Inflation

* Single Tyre Application

* Suit for: Car, Light Truck

ST-36N Tire nitrogen inflation machine Technical Data

Dimensions (Height*Width*Depth)1255mm*700mm*435mm

49.4”*27.6”*17.1”

Net Weight                                                    87kg/191.8lbs

Gross Weight                                                104kg/229.3lbs

Packing Size (Height*Width*Depth)1380mm*730mm*510mm

54.3”*28.7”*20.1”

Power Requirement                                  100-240Vac 50/60HZ

Power Consumption                                 30VA

Operating Temperature Range          -20℃/-4°F to 70℃/158°F

Compressed Air Input Range              87-145PSI/6-10bar /600-1000kPa

Compressed Air Input Flow                 500L/min (17.0cfm)

Nitrogen Purity                                         95-99+%

Nitrogen Output                                        58L/min (2.0cfm) @116PSI/8bar/800kPa

Absorption pressure

Maximum Nitrogen Pressure in Tank 102PSI/7bar/700kPa

ST-36N Nitrogen filling station Specifications:

1. Generates nitrogen from your compressed air

2. 2 Pre-Filters

3. 50L/13.2gal (us) internal nitrogen storage tank

4. Auto-start inflation

5. Remain at last setting

6. Audible and visual end of the cycle signal indicators

7. LED display

8. 1 Nos.*10m/32.8ft standard hose with single clip-on open tyre chuck

9. Nitrogen purity test port

10. 1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun

11. To increase the tyre nitrogen purity, the valve core must be removed manually and allow all the air to escape from the tyre. Before inflate tyre with nitrogen, firstly the unit will pump the residualair from the tyre by the internal vacuum generator then inflate nitrogen to the target tyre pressure

ST-36N Tire nitrogen generator and inflator Operation Steps:

1. Set final target pressure using the + and – buttons.

The upper LED screen will show the target pressure.

2. Remove the tyre valve core to exhaust the residual air from the tyre, then re-fit the tyre valve core.

3. Connect air hose to tyre valve stem.

4. Press “START” key.

5. When unit “beeps” and the upper LED screen flashes “END”, tyre inflation is complete.


Tags: ,,

1 comment

  1. sisubalan,k,s
    2013/10/15 at 07:52:58

    ST-36N Tyre Nitrogen Filling Station

    above this modle plz sent qutation as soon as posible

    by\
    sisubalan.k.s
    service manager
    Standardtvs@hotmail.com

Comments

Name *

Mail (will not be published) *

8+5=? Verification code *