Garage equipment, Automotive repair and maintenance

ST-35N2P Nitrogen Generator and Conversion System

ST-35N2P nitrogen generator and conversion system for single tyre application

Automatic tire nitrogen generator and inflator

* Converts the tyre to Nitrogen at the touch of a button.

* Auto-Start Inflation

* Over Pressure Setting (OPS)

* Single Tyre Application

* Suit for: Motorcycle, Car, Light Truck

 

ST-35N2P Tyre Nitrogen Generator Technical Data Summary:

Dimensions (Height*Width*Depth)  1255mm*720mm*435mm

49.4″*28.3″*17.1″

Net Weight                                              90kg/198lbs

Gross Weight                                         108kg/238lbs

Packing Size (height*Width*Depth)  1380mm*730mm*510mm

54.3″*28.7″*20.1″

Power Requirement                             100-240Vac  50/60HZ

Power Consumption                            40VA

Operating Temperature Range          -20℃/-4°F to 70℃/158°F

Compressed Air Input Range             87-123PSI/6-8.5bar/600-850kPa

Compressed Air Input Flow                 250L/min (8.0cfm)

Nitrogen Purity                                        95-99+%

Nitrogen Output                                      50L/min (2.0cfm) @116PSI/8bar/800kPa

Absorption pressure

Maximum Nitrogen Pressure in Tank 109PSI/7.5bar/750kPa

Operating Range                                     5-90PSI/0.3-6.2bar/35-620kPa

Resolution                                                1PSI/0.1bar/5kPa

Units of Measurement                            PSI/bar/kPa

 

ST-35N2P Specifications:

1. Generates nitrogen from your compressed air

2. 2 Pre-Filters

3. 50L/13.2gal (us) internal nitrogen storage tank

4. Auto-start inflation

5. Automatic zero drift adjustment

6. Remain at last setting

7. Audible and visual end of the cycle signal indicators

8. Self-diagnostic features

9. Vandal resistant mechanical switches

10. Large backlight LCD display

11. 1 Nos.*10M/32.8ft standard hose with single clip-on open type chuck

12. Comprehensive diagnostics and error reporting

13. Nitrogen purge and fill cycle (N2P)

14. Nitrogen purity test port

15. Adjustable over pressure setting (OPS)

16. Adjustable number of cycles

17. Adjustable lower purge pressure limit

18. Auto Shut-Off

19. 1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun

 

ST-35N2P Operation Steps:

1. Set final target pressure using the + and – buttons. The LCD screen will show the target pressure.

2. Connect air hose to tyre valve stem.

3. FOR TOP-OFF ONLY: Push the “FILL/PURGE” button once.

FOR NITROGEN CONVERSION: Push and hold the “FILL/PURGE” button for 2 seconds until the LCD screen shows “N2P”.

4. When unit “beeps” and the LCD screen flashes the target pressure, tyre inflation is complete.


Tags: ,

Comments

Name *

Mail (will not be published) *

4+0=? Verification code *